Water Recycle Systems
WFS 42 WATER FILTER SYSTEM SPECIFICATIONS
Rated flow:
12 gpm (18000 gpd)
Electrical requirement:
115 VAC, 60 Hz, 1 phase, 15 amp total
Feed pump:
Self priming centrifugal cast iron pump with 1/3 HP thermally protected motor. Collects water from washing area.
Discharge pump:
High head centrifugal pump with 1/2 HP thermally protected motor. Supplies pressurized water to use.
Electrical controls:
GFCI provided Prewired with 15 amp plug, 10 ft cord Power switch, lighted NEMA 4 rated enclosure
Oxidizer metering pump:
Electronic controlled diaphragm pump with stroke rate and stroke length controls and automatic degassing head. Injects oxidizer to control odor and bacteria.
Filter system:
High capacity permanent element filter system with manual backwash, plus replaceable 20" long 5 micron cartridge filter for final polishing.
Holding and collection tank:
1000 gallon polyethylene holding tank, With divider and inlet and outlet piping.
Make up water:
Flow as required for application 100 psi maximum pressure
Connection sizes:
Feed pump- 1 NPT
Treated water outlet- 1 NPT
Drainline- 1NPT
Make up water- 1/2 NPT
Overall dimensions:
Tank 9 ft long, 5 ft wide, 5 ft tall Control and pumping module 4 ft long, 2 1/2 ft wide Module includes pumps, control panel, and filter system.
Shipping weight:
600 pounds approximate
Options:
Additional water storage capacity. pH adjustment system. Activated carbon water polishing system. Ozone treatment. Pretreatment systems, oil skimmers, oily water separators. Custom modifications available.
